MB Series Rod Mill Mine Grinding Mill for Feldspar Quartz Iron Ore Copper Ore
Introduction of Rod Mill
MB series rod mill has certain selective grinding effect in the grinding process because of the grinding medium and ore are line contacted. The product particle size is uniform, and excessive grinding ore grain is little. It is widely used in fine crushing and grinding operation of feldspar, quartz, abrasive, refractory material, cement, steel grit, slag, copper ore, iron ore, gold ore grit and other hard or brittle material.
Advantages of Rod Mill
1. When the diameter of rod mill is less than 3200mm, its conventional configuration is using rolling bearing instead of bearing bush sliding bearing energy saving 10% - 20%;
2. When the diameter of rod mill is more than 2700mm, its conventional configuration is using slow driving for maintenance installing liner use;
3. When the diameter of rod mill is less than 1500mm, its conventional configuration is monolithic large chassis reducing the installation time and installation requirements;
4. When the power of rod mill is less than 110 KW, it uses cage asynchronous motor; When the power of rod mill is more than 110 KW, it uses wire wound asynchronous motor; When the power of rod mill is more than 400 KW, it can use high pressure (6 KV or 10 KV) asynchronous motor or the TDMK series high voltage (6 KV or 10 KV) synchronous motor;
5. Drum Feeder Spiral Feeder and Joint Feeder are available for meeting different working condition;
6. The gear lubrication mode has grease lubrication thin oil lubrication and automatic oil mist lubrication for meeting different working condition;
7. The bearing lubrication has manual and electric grease lubrication pump to select and it can realize lubrication automation;
8. There are a variety of liner plates type to select. Compared to A series standard type B series energy-saving type can save energy 10% - 20%.
Technical Data:
| Model | Effective volume (m3) | Max. steel rod load(t) | Capacity (t/h) | Power (kW) | Weight (t) |
| φ900×1800 | 1 | 2.3 | 2-6 | 15 | 4.2 |
| φ900×2100 | 1.1 | 2.5 | 2.2-6.6 | 18.5 | 4.9 |
| φ1200×2400 | 2.4 | 5.4 | 4.8-14 | 30 | 8.7 |
| φ1200×3000 | 3 | 6.8 | 6-18 | 37 | 13 |
| φ1500×3000 | 4.8 | 11 | 9.6-29 | 75 | 15 |
| φ1500×4500 | 7.1 | 16 | 14-43 | 110 | 16 |
| φ1830×3000 | 7.1 | 16 | 14-43 | 130 | 28 |
| φ1830×4500 | 10.6 | 24 | 21-64 | 155 | 32 |
| φ2100×3000 | 9.4 | 21 | 19-56 | 155 | 42 |
| φ2100×3600 | 11.3 | 25 | 23-68 | 180 | 44 |
| φ2100×4000 | 12.6 | 28 | 25-76 | 210 | 50 |
| φ2100×4500 | 14.1 | 32 | 28-85 | 245 | 52 |
| φ2200×3600 | 12.5 | 28 | 25-75 | 210 | 52 |
| φ2200×4500 | 15.6 | 35 | 31-94 | 245 | 54 |
| φ2400×3600 | 15 | 34 | 30-90 | 280 | 60 |
| φ2400×4500 | 18.7 | 42 | 37-112 | 320 | 71 |
| φ2700×3600 | 18.8 | 42 | 38-113 | 380 | 82 |
| φ2700×4500 | 23.5 | 53 | 47-141 | 480 | 90 |
| φ3200×4500 | 33.5 | 75 | 67-201 | 800 | 137 |
| φ3600×4500 | 42.8 | 96 | 86-257 | 1120 | 200 |
Ball Mill Working Site:
Product Tags:
|
|
Feldspar Quartz Iron Ore Grinding Rod Mining Ball Mill 14-43t/H Images
|
